HORIZON 1000 CNC CMM (High Performance)
Suitable For: Inspection Room
Measure Vol. (mm): For Horizon 1000 CMM
Y 1200 & 2000
Accuracy: For Renishaw
TP20 (1.9 + L/250) μm
TP200 (1.8 + L/250) μm
SP25M (1.75 + L/250) μm
Air req.: Yes
Max. Acceleration: 1020mm / sec
Load Capacity: 1000kg
Supports Camera: Yes
Extending The Linear Drive Horizon
Drawing upon the tremendous success of the Horizon 800, The Horizon 1000 has a larger X-Y-Z axis travel whilst utilising the same frictionless linear drives.
The entire design of the Horizon 1000 has been optimised to take full advantages of parts already used on the Horizon 800 whilst improving the stiffness-to-weight ratio across the bridge assembly. Most notably: The Y-axis rail is 200mm taller so that the same right-hand-side linear drive system is common and improves rigidity; the carriage assembly has reduced in size and weight, without compromising metrology performance, to improve the stiffess-to-weight ration; the Z-axis motor has increased power to optimise its performance; the left-hand-side air bearing assembly has a custom extruded profile to keep weight to an absolute minimum and maintain stiffness.
The Horizon 1000 is a standout coordinate measuring machine with fast, smooth and silent motion that is ideally suited to contact scanning. It also has a first-term accuracy specification of under two microns.
Linear motors are non-contact and therefore have no wearing parts, thus provide the perfect solution for CMM drives, improving reliability and reducing maintenance.
Inquiry - HORIZON 1000 CNC CMM (High Performance)