• CALL US
    +604-538 1998, +604-530 1998, +6012-498 2349
  • EMAIL
 

TP8

TP8

Share:


TP8



Specifications

Integral Probe: Yes

Index Motion: Manual

Max. Length: 105mm

Index Resolution: Infinite

Index Positions: Infinite

Repeat. Indexing: No

Repeat. Stylus Change: No


TP8 (Indexable but Non Repeatable Probe Head)

The TP8 probe offers an entry level option for customers that require infrequent indexing of the probe and no indexing during the running of a measurement programme. The TP8 is supplied with two knuckle joints to allow infinite alignment of the probe to the feature being measured, but this alignment is non repeatable, meaning that the stylus will need to be requalified following each index. The TP8 probe accepts the M3 range of styli.

Dimensions

 

Principal application Robust universal DCC and manual CMMs.
Sense directions 5-axis: ±X, ±Y, +Z
Unidirectional repeatability maximum (2σ μm) (at stylus tip) 0.5 μm (0.00002 in)
Pre-travel variation 360° (XY plane) ±1 μm (±0.00004 in)
Weight (without shank) 95 g (3.36 oz)
Stylus range M3
Stylus force range (adjustable) 0.11 N - 0.3 N
Stylus force (set by Renishaw) 0.11 N - 0.13 N
Stylus overtravel (typical) XY plane:
±22°
+Z axis:
5.5 mm (0.22 in) @ 0.11 N
2 mm (0.08 in) @ 0.3 N
Mounting method Shank
Suitable interface PI 7-3, PI 200-3, UCC

Above data applies to test conditions as follows:

  • Stylus length 21 mm (0.83 in)
  • Stylus velocity 480 mm/min (1.57 ft/min)
  • Stylus force 0.11 N to 0.13 N
  • Ø4 mm ball


 Inquiry - TP8