• CALL US
    +604-5381998, +6012-480 7363
  • EMAIL

ABERLINK

EXTOL Shop Floor CNC CMM (Delta Mechanism)

Coordinate Metrology ‘Comes of Age’ To Pace Production

Metrology News recently visited British CMM manufacturer Aberlink, renowned for its design innovations, to witness the physical launch of EXTOL, the world’s first CMM to utilize the delta mechanism.


More Details...

ABERLINK AXIOM TOO (Manual CMM)

ABERLINK AXIOM TOO Manual / CNC CMM
Aberlink 3D CMM is an economical series of measuring machine incorporate with a Smart, Spur & Simple (3S) error correcting graphical interface software designed for the first timer user, means greater productivity and profitability to customers.


More Details...

ABERLINK AXIOM TOO (CNC CMM)

ABERLINK AXIOM TOO Manual / CNC CMM
Aberlink 3D CMM is an economical series of measuring machine incorporate with a Smart, Spur & Simple (3S) error correcting graphical interface software designed for the first timer user, means greater productivity and profitability to customers.


More Details...

AXIOM TOO HS (High Specification) CNC CMM

Axiom too HS... better again.

Since 2004 the Axiom too CMM has been providing manufacturing industry with a fast and accurate solution for their measurement problems.. but, as ever, Aberlinkare continually striving to improve the solutions which we offer.


More Details...

HORIZON CNC CMM (High Performance)

Aberlink Broadens its CMM Horizons With Linear Motor Drives

Aberlink has launched a new range of CNC bridge-style CMM. Utilizing linear motors, the HORIZON breaks new ground in CMM design. With an 800mm travel in the X axis, the Horizon completes Aberlink’s range of bridge CMMs and will further extend their horizon into the higher-performance CMM marketplace.


More Details...

AZIMUTH CNC CMM (Large Volume)

Azimuth... from strength to strength

As CMMs get larger, it is not simply a case of scaling up the design of smaller models. Stiffness of the structure is critical, but weight must also be kept to a minimum.T


More Details...

PROJECT X (Patented Vision Measuring System)

Project X finally replaces the old technology of a profile projector. It is easier to use than a profile projector. It is quicker to use than a profile projector and it will
deliver reliable, consistant inspections time after time. Project X is available as either a manual machine or with full CNC control.


More Details...

CMM Camera System

Specification:

  • Sensor: 3 Mega pixel high speed colour camera
  • Resolution: 2048 x 1536 (QXGA)
  • Stand off: min 125mm | max 1000mm (manually adjusted)
  • Field Of View: min 9.5mm | max 125mm
  • Pixel Size: min 4.8

More Details...

CMM Fixture Kit

Patent pending T-slot and T-nut technology provides infinite adjustment of the fixture components in multiple directions. Clamps, locators and supports can be placed in exactly the right position to suit the part. Greater flexibility results in less complicated designs, fixtures are easier to assemble and completed in less time.


More Details...

Industrial CMM Joystick

The industrial CMM joystick is a robust lower-cost version of the acclaimed CMM touch-screen joystick. It has full X-Y-Z axis motion control, X-Y-Z +/- direction measurement capability, feed rate override and the ability to insert Move Via points as required.


More Details...

Touch Screen CMM Joystick

The touch screen joystick gives you control of the Aberlink 3D inspection software and the 3-axis machine motion from an easy to operate handheld device.


More Details...

CMM Collimated Light

The CMM collimated light enables backlight illumination of 3D or turned components when used with the CMM Camera System. When using collimated light to backlight components, a clear and crisp silhouette, similar to using a profile projector, is produced.


More Details...

CMM Temperature Compensation

The Aberlink Temperature Compensation option enables your CMM to maintain accuracy in an uncontrolled environment, such as on the shop floor.

In an ideal world, your CMM would be installed in a perfectly temperature controlled room.


More Details...

CMM Automation

The Aberlink automation interface adds the capability for Aberlink 3D programs to be remotely controlled and monitored using an external system allowing any Aberlink CMM to be integrated with an automated component handling system, whether this be a fully controlled, PLC driven manufacturing system, a robotic loader or just an automatic bar feeder.


More Details...

Aberlink3D Mark 4

The whole philosophy for Aberlink is to make measurement easy. Aberlink 3D software has been written by engineers for engineers and sets the industry standard for simple-to-use software. Designed around a graphical interface. Aberlink 3D can work in 2D or 3D, on manual or CNC CMMs and is equally at home when used with either touch, scanning or vision systems.


More Details...

CAD Software Modules

CAD Comparison Modules

The Aberlink CAD Comparison software module enhances Aberlink 3D with the capability to compare measured points to a CAD model. Often this will be the only way to measure complex parts or perhaps sometimes drawings for the component simply don’t exist.


More Details...

Programming from CAD

For many years Aberlink 3D software has been setting the industry standard for both ease of use and speed of programming. However, until now this has been best done by using the teach-and-repeat method of programming when measuring a component.


More Details...

Vision Software

The Aberlink Vision software module allows Aberlink 3D software to be used for non- contact measuring. Fully Automatic edge detection tools can be used in both manual and CNC mode ensuring fast and repeatable results without relying on the skill of the operator.

Powerful tools allow both geometric and complex shapes to be measured easily.


More Details...