• CALL US
    +604-5381998, +6012-480 7363
  • EMAIL

Coordinate Measuring Machine Penang

CMM Camera System

Specification:

  • Sensor: 3 Mega pixel high speed colour camera
  • Resolution: 2048 x 1536 (QXGA)
  • Stand off: min 125mm | max 1000mm (manually adjusted)
  • Field Of View: min 9.5mm | max 125mm
  • Pixel Size: min 4.8

More Details...

CMM Fixture Kit

Patent pending T-slot and T-nut technology provides infinite adjustment of the fixture components in multiple directions. Clamps, locators and supports can be placed in exactly the right position to suit the part. Greater flexibility results in less complicated designs, fixtures are easier to assemble and completed in less time.


More Details...

Industrial CMM Joystick

The industrial CMM joystick is a robust lower-cost version of the acclaimed CMM touch-screen joystick. It has full X-Y-Z axis motion control, X-Y-Z +/- direction measurement capability, feed rate override and the ability to insert Move Via points as required.


More Details...

Touch Screen CMM Joystick

The touch screen joystick gives you control of the Aberlink 3D inspection software and the 3-axis machine motion from an easy to operate handheld device.


More Details...

CMM Collimated Light

The CMM collimated light enables backlight illumination of 3D or turned components when used with the CMM Camera System. When using collimated light to backlight components, a clear and crisp silhouette, similar to using a profile projector, is produced.


More Details...

CMM Temperature Compensation

The Aberlink Temperature Compensation option enables your CMM to maintain accuracy in an uncontrolled environment, such as on the shop floor.

In an ideal world, your CMM would be installed in a perfectly temperature controlled room.


More Details...

CMM Automation

The Aberlink automation interface adds the capability for Aberlink 3D programs to be remotely controlled and monitored using an external system allowing any Aberlink CMM to be integrated with an automated component handling system, whether this be a fully controlled, PLC driven manufacturing system, a robotic loader or just an automatic bar feeder.


More Details...

Aberlink3D Mark 4

The whole philosophy for Aberlink is to make measurement easy. Aberlink 3D software has been written by engineers for engineers and sets the industry standard for simple-to-use software. Designed around a graphical interface. Aberlink 3D can work in 2D or 3D, on manual or CNC CMMs and is equally at home when used with either touch, scanning or vision systems.


More Details...

CAD Software Modules

CAD Comparison Modules

The Aberlink CAD Comparison software module enhances Aberlink 3D with the capability to compare measured points to a CAD model. Often this will be the only way to measure complex parts or perhaps sometimes drawings for the component simply don’t exist.


More Details...

Programming from CAD

For many years Aberlink 3D software has been setting the industry standard for both ease of use and speed of programming. However, until now this has been best done by using the teach-and-repeat method of programming when measuring a component.


More Details...

Vision Software

The Aberlink Vision software module allows Aberlink 3D software to be used for non- contact measuring. Fully Automatic edge detection tools can be used in both manual and CNC mode ensuring fast and repeatable results without relying on the skill of the operator.

Powerful tools allow both geometric and complex shapes to be measured easily.


More Details...